Call Instant Quote Free Estimate

Screen and Recoat: The Easy Way to Refresh Hardwood Floors

If your hardwood looks dull but is not worn through, you may not need a full sanding.

By Andrey Kravchuk · Updated

Short answer: A screen and recoat lightly buffs the top of your old finish and adds a fresh coat. It brings back shine and protection in about a day for much less than a full refinish. It does not remove deep scratches, gray spots or stain color.

Planning a project? See our hardwood floor refinishing page.

What happens during a screen and recoat

The floor is cleaned, then buffed with a fine screen that scuffs the old finish so new finish can stick. Dust is cleaned up, and one fresh coat of finish goes on. No wood is sanded away.

When it works

  • The floor looks dull or hazy
  • Light surface scuffs from shoes and chairs
  • Finish is thin in spots but not worn to bare wood
  • You want to protect a floor before it gets worse

When you need a full refinish instead

  • Gray or bare wood showing
  • Deep scratches you can feel with a nail
  • Water stains or black spots
  • You want a new stain color

One catch: wax and polish

Floors that were waxed or treated with some store-bought polishes may not take a new coat. The new finish can peel. We check for this before recommending a recoat.

Make it a habit

Recoating every few years, before the finish wears through, can push back a full sanding for a long time. That saves wood and money.

FAQ

Frequently Asked Questions

How long does a screen and recoat take?

Usually about a day of work, plus drying time before normal use.

Can engineered floors be recoated?

Yes. A recoat is a good option for engineered floors because it does not sand away the thin wood layer.

Will a recoat remove scratches?

It hides light scuffs but does not remove scratches that go into the wood. Those need a full sand.